Best Framing Nailer for the Money – 2021

There used to be a time when woodworking projects were done by people who did it for a living, basically professionals. However, ever since that time, ‘’DIY” has come a long way.

Due to technological advancement, a wide variety of tools have emerged to become very well-known for all the enthusiasts out there.

Among them, the most popular one would be the nail gun, which is often called a framing nailer. But, the best framing nailer is the one which ensures safety, proper speed and mostly gets your work done.

Hence, this article has been solemnly created so that you can gain all the insights and achieve your desired nail gun.

In a Hurry? Check Out Our Top 5 Picks of Framing Nailer 

Benefits of Framing Nailer

Before you insert such a high-profile tool to your arsenal, you must know about the benefits it provides:

  • Time Saver

Say no to using hammers from now on, because an obvious advantage of using a framing nail gun is that it will save you a ton of time. No matter how experienced you are, you can’t compare the speed of this tool with any product in the market.

  • Superior Safety

As we all know, there is always a potential for a devastating injury whenever there is a hammer in use, especially for our fingers. It is not guaranteed that a nail gun will ensure you 100% protection. But, if a framing nailer is appropriately used, then its usage is way safer.

  • Absolute Convenience

As there is a magazine involved with such a tool, you won’t have to carry around bucket full of nails all the time. All of you have to do is load the magazine up and finish your tasks one by one.


10 Best Framing Nailer Reviews

No matter how many framing nailer reviews you go through every day, it gets pretty tricky in decision-making due to a wide selection of options available.

Hence, to minimize your problems, this article has narrowed down to the top 10 framing nailers in the marketplace after going through an extensive amount of research.


1. NuMax SFR2190 Pneumatic Round Head Framing Nailer

NuMax SFR2190 Pneumatic 21 Degree 3-1/2' Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with...

When it comes to overall value, NuMax is the best Pneumatic framing nailer for the money. It boasts tons of features that will ensure every buck you spend on this model is worth it.

We are starting with a highlighted feature, which is the trigger adjustment settings. This allows you to adjust the tool to either single or multiple triggers. The only option is for the small tasks that don’t require any nails, whereas the various triggers would be for the heavy-duty projects, which require tons of nailing.

Such a feature lets you achieve overall precision. The structure of this tool is coated with magnesium ensuringthat the product is lightweight and durable. This makes the model very tough, which helps you accomplish heavy-duty work while providing ease of access in your arms as it is light in weight.

Speaking of accessibility, NuMax offers an ergonomic grip. This feature makes all the difference out there as you are getting to get a hold of such a structure securely and with the utmost comfort. Moreover, you won’t be feeling the issue of vibrations because it is built that way, which inevitably allows you to work more accurately.

This particular model from NuMax is also highly versatile due to the no-mar tip and a depth adjustment setting. The Tip option protects the surface you work on from dings and dents. This ensures a flawless finish.

And, the depth adjustment option enables you to customize depths for all the different types of projects you take on, which always ensures an appropriate hold. All of this makes the model compatible with several working surfaces.

Check Price on Amazon

  • Comes at a budget-friendly cost
  • No-Slip Teeth to ensure a secure firing
  • Dust cap and air filter for protection of the engine from dust
  • Air exhaust is adjustable
  • Ergonomic grip
  • Rafter hook unavailable
  • No tool-less jam removal

2. BOSTITCH Framing Nailer (F21PL)

BOSTITCH Framing Nailer, Round Head, 1-1/2-Inch to 3-1/2-Inch (F21PL)

Here’s the best value framing nailer on the market right now. One of the reasons for the product being so valued is because of its depth adjustment option. With one click of your thumb, you’ll have the ability to control the depth at its most excellent level. This will enable you to have a proper hold on the surfaces you work on.

A major issue that everyone faces is that the nails get jammed in the nailer. This causes a lot of problems and makes working with the machine extremely difficult. At times you’ll get frustrated having to change the whole thing on numerous occasions.

However, with Bostitch, you won’t be facing such an inconvenience because the structure has been built-in that way. When a nail gun is lightweight and equally durable, what more could you possibly ask for? Weighing approximately around 8.1 pounds, it lets you have superior control over the model as a whole.

But, just because it is light in weight, doesn’t mean that the product won’t be able to endure impacts. The tool is sturdy enough to take on massive impacts.

One of the cool aspects of this model is the tool-less adjustments. Just like the depth control setting mentioned above, you’ll also be able to change between multi to single fire with a simple trigger. For further leniency, you’ll also be able to switch between metal connectors to plastic-collated nails within seconds.

The model comes along with a built-in air filter. With this feature, you’ll be able to set the position of the nailer in such a way that it won’t be stirring up any debris while you are using the tool. Hence, it is very crucial to have a tool which consists of an air filter to prevent internal damage.

Check Price on Amazon

  • High magazine capacity (can hold up to 60 nails)
  • The impeccable jam clearing system
  • Dual-purpose nail gun due to interchangeable nose-pieces
  • 7-year long warranty
  • Anti-slip rubber grip
  • Reloading time tends to be a little slow
  • Air compressor required

3. Freeman PFR2190 Pneumatic Round Head Framing Nailer

Freeman PFR2190 Pneumatic 21 Degree 3-1/2' Full Round Head Framing Nailer with Case Ergonomic and Lightweight Nail...

The one product that you’ll find in all the framing nail gun reviews is a Freeman. This product shares a high resemblance with the model from NuMax. Let’s start with the fact that the tool is durable due to the magnesium coating and also extremely lightweight.

Hence, the nailer will be able to take on the toughest of environments without conceiving any damage and also allow you to achieve control. A highlighted feature of this product is the anti-dry fire mechanism. This particular attribute is considered a lifesaver.

Some nailers keep on firing even after the slot is empty, which causes severe damages to the surface. Hence the feature puts an automatic stop to the firing of nails whenever the tank is near vacant, which will quickly allow you to insert nails and keep on working.

Air contamination is prevented through several features with this model. Firstly, there is an adjustable air vent. This makes sure that the air is kept away from bothering your face while you are working.

Then there is the anti-dust cap and air filter. These prevent dust particles from contaminating the model and also keep the internal parts of the product clean. Sometimes a good handle is all you need when it comes to working.

Freeman offers an ergonomically designed grip, which lets you have a nice and firm hold of the overall structure. It doesn’t end there; with such a grip, you’ll also be able to feel comfortable. This will help you maintain your focus when you work for long hours.

Moreover, the product includes a no-mar tip which will allow you to have superior stability and control without causing any damages to any materials.

Another great part about Freeman is that you don’t have to bring any extra set of tools to make adjustments. With a simple trigger button, you’ll be able to change the depth of the overall structure.

Check Price on Amazon

  • Magnesium housing for durability and lightweight
  • Works on several different surfaces due to depth mechanism
  • Air contamination is heavily minimalized
  • You change from single firing to quick-fire with a simple trigger
  • Anti-Dry fire system
  • The amount of recoil is required
  • The magazine holds only about 55 nails

4. DEWALT 20V MAX XR Framing Nailer(DCN692B)

DEWALT 20V MAX XR Framing Nailer, Dual Speed, Tool Only (DCN692B)

DeWalt is considered a powerhouse in the industry. Surely there are other brands out there on the market, but none comes close to this one. Let’s have a look at the reasons. Firstly, it consists of a trigger which fires dual modes, the sequential and the bump.

When your tasks require less precision, you can try out the bump mode, which will allow you to work with ease. Whereas, if your work involves framing windows or doors, the sequential mode is highly preferred as it bolsters the accuracy.

Just like the dual modes, this brand also offers two speeds. The first tier speed is for moderate usage while the second tier is for high-rated work. Hence, you’ll be able to set the bars according to your taste.

If the first tier speed isn’t sinking the nail well enough, you’ll easily be able to use speed 2 with a simple switch for more aggressiveness. All of it is possible because of the brushless engine and the motor-design built. When it comes to reloading, you’ll be able to get it down without breaking a sweat.

Once the nails are empty in your slot, within mere seconds, you’ll be able to reload it. The minimization of the loading time brings more convenience for the consumer who’ll be using this tool. Even if the model is compared with a coil nailer, the product does its job very well.

An issue that everyone faces during long usage of the machine is arm fatigue. That happens due to the consistent vibration of the machine. However, this product consists of an anti-vibration technology which minimizes the problem.

And, since you also have a speed selector option, these two features combined you’ll ensure long battery life for the nailer and a long, effortless usage for yourself.  Saving the best for the last; a highly interesting attribute of this model is the intelligent fault indicator.

The feature will not only inform you whenever the battery is low, but it will also warn you that you are almost running out of nails. You’ll also be able to know how many nails you’ve already fired. With all these features involved, it is no wonder that Dewalt is referred to being the best-rated framing nailer.

Check Price on Amazon

  • No need for added lubrication
  • Different length of nails can be processed through different nail settings
  • Battery life is long-lasting
  • Minimal vibration technology
  • Dual trigger modes
  • Expensive
  • Requires two batteries a day for full power

5. Paslode – 905600 Cordless XP Framing Nailer

Paslode, Cordless XP Framing Nailer, 905600, Battery and Fuel Cell Powered, No Compressor Needed

No matter how many times you go through the framing nailer reviews, you’ll undoubtedly find a product from Paslode in there. Now, this model is as convenient as it gets. This product comes with a compact design that will easily fit into hard to reach places like roof trusses, studs, and joists.

Considering that it is a cordless model, the product is pretty lightweight. The weight of the tool is around 7 lbs, which makes it very easy to use. Additionally, the product also consists of an ergonomic frame.

Hence, you are not only getting the ease of access, but you’ll also be able to continue working for a long period without any fatigue.

Unlike other products we have reviewed in this list, this model doesn’t require any air compressor to run. It includes a fuel cell and a 7 volts Li-ion battery which provides up to 50% more life than any other product available in the market. When it is fully charged, you can fire up to 9000 nails.

That is ridiculously high, and all you have to do is charge it up for an hour or so. But, what happens when the battery runs out and you are in the midst of crucial project work? There is absolutely no reason to worry as Paslode has it all covered.

With the quick-charge option, you’ll be able to fire up 200 more nails within a couple of minutes of recharging time.

The model is powerful enough to drive a nail flush on to any object you wish. Whether the framing nails are sized at 2-inches or more, the product’s power is capable of delivering speed at a high-profiled rate.

Check Price on Amazon

  • Can drive up to 9000 nails per charge
  • Additional 200 nails can be used through quick charging mode
  • A hefty amount of battery life is ensured
  • Guaranteed lightweight and durability
  • Convenient model to use
  • Expensive
  • Frequent reloading is required

6. BOSTITCH Pnumatic Framing Nailer (F28WW)

BOSTITCH Framing Nailer, Clipped Head, 2-Inch to 3-1/2-Inch (F28WW)

Here we have yet another product from Bostitch, which speaks volumes about the brand’s quality. Just like the other models from this company, it is also a top-rated framing nailer. Apart from the fact that this tool is extremely cheap, there are tons of factors involved which makes this product so valued in the marketplace.

Firstly, the product is incredibly lightweight, because it is a pneumatic nailer. Weighing approximately around 7 pounds, this product is very easy to use. It is because of the button placements and its balanced weight.

Bostitch focuses a lot on safety. Hence you’ll find most of their products to be lightweight. You’ll also be able to carry the tool around without conceiving any strains. Moreover, the model also comes along with a rubber skidpad and a steel wear guard for further protection during heavy-duty project work.

Even though the model requires an air compressor to run, you won’t be needing it every time you wish to change the power settings. Moderate options involve 80 PSI, and it can be increased up to 120 PSI.

The tool delivers a force of 1050 pounds per inch every time you are driving a nail. Depth adjustments can be made through a patented button of the product itself. This model involves a dual firing mode set up: the Bump firing mode and the sequential firing mode.

Bump fire trigger mode can be used for work which doesn’t require much precision like exterior or interior wall sheathing. On the other hand, sequential firing is like the polar opposite of bump fire; this mode is highly recommended for achieving complete accuracy whenever you are using the gun.

Check Price on Amazon

  • Highly inexpensive
  • Lightweight even though it is a pneumatic product
  • Very comfortable and easy to use
  • Magazine capacity can stack up to 100 nails
  • Can be utilized on different tasks
  • Doesn’t consist of any dry-fire system
  • Specific nails need to be purchased

7. BOSTITCH Coil Roofing Nailer

BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46)

This is another product from Bostitch to make this list. Bostitch is also one of the top framing nailers in the industry. But unlike the other product, this model is far more lightweight, weighing approximately 4.9 pounds.

And, since the tool consists of magnesium housing, you won’t worry about it being too fragile as the product is durable enough. This coil roofing nailer can shoot over 100 nails per minute. That’s immensely fast. However, if you intend to reach perfection, then this tool has a tool-free depth adjuster.

The feature allows you to adjust the air pressure that is fitting for the surface you are working on, which will help you sink the nail effortlessly. You won’t have to face the hassle of bringing in extra small tools to change the settings.

One of the most crucial issues consumers face is that at times, the nail gun will keep on shooting even when no nails are remaining. This might cause permanent damages in the areas you’ll be working on. Thankfully, BOSTITCH has inserted a dry-lockout system in this model.

Hence, you’ll be able to know when you’ll have to load more nails. To achieve accuracy, you’ll need to have a model which can be controlled smoothly. The weight of this tool does provide a distinctive advantage. However, the benefits get amplified with the over-molded rubber-coated grip that comes along with the product.

Not only does it let you achieve the utmost comfort, but it will also allow you to have more precision during work.

Lastly, a patented feature brought to you by BOSTITCH is the one-step loading system. This mechanism lets you achieve faster loading because the canister includes a side loader.

Moreover, the nailer’s working pressure is from 70 PSI to 120 PSI. It creates a force of over 410 lbs per inch while a nail is being shot, which is ridiculously heavy.

Check Price on Amazon

  • Drive quality is always consistent
  • A dry-fire feature to let you know whenever nails are needed
  • Durable and lightweight
  • Side-loading canister
  • Depth control is adjustable
  • Magazines are not considered large
  • Fires double at times

8. 3PLUS H2190SP 21 Degree Full Round Head Framing Nailer

3PLUS H2190SP 21 Degree Full Round Head Framing Nailer

3PLUS is a very well-known product that’s been booming globally for all the enthusiasts out there. You will be amazed by the fact that the tool can be used in several tasks like roofing, framing, sheathing, fencing, and so much more.

It can shoot a 21-degree plastic-coated framing nail seamlessly. However, the nail size has to be around 2 to 3.5-inches. The tool is an ideal product for multi-weather conditions. It is mostly due to the no-mar tip that is inserted in the machine. This particular feature works as a shield for your nail gun.

Air contamination or tiny particles could severely damage your product internally over time. Moreover, the tip also prevents the tool from causing damages to your working surfaces.

At times air from the exhaust could hamper your health in the long run because that air is traveling straight from the machine. With the multi-directional exhaust system, you’ll be able to rotate the exhaust air at any desired direction you want to. You will have the capability to move the particular segment at a 360-degree angle.

A tool-less depth adjuster is a major plus point for those who tend to change the settings frequently. Since you don’t need any small tools to change the overall depth, you’ll be able to focus on your projects more thoroughly.

Moreover, with the adjustment feature, you are allowed to set the depth of a nail to achieve countersink nailing or precise flush. We all know how accidental firings can cause major impacts on the surfaces and devastating injuries to anyone nearby.

Having an unsafe nailer is very risky, but that is not the case with 3PLUS. Because the model comes along with a dry-fire lockout system which will always notify you whenever the magazine is about to get empty. And, with the single sequential mode installed, you’ll always be able to get precise results.

Check Price on Amazon

  • Has the capability to handle several project applications
  • Consists of a multi-purpose exhaust cover
  • Easy accessibility ensured
  • Highly user-friendly
  • Can be applied to any weather conditions
  • Not as durable as the other products
  • Warranty information is not mentioned

9. Hitachi NR83A5 Framing Nailer with Rafter Hook

Hitachi NR83A5 3-1/4' Plastic Collated Framing Nailer with Rafter Hook

What sets Hitachi apart from the rest? It is the fact that they provide quality products in the frame nailing market. This model from the famous company is as reliable as it gets. For easy maneuverability, the product is significantly lightweight (8.8 pounds).

The tip claw of the tool is completely hardened. Hence, the nose area of the model won’t wear out over time.

Moreover, the attribute will also ensure that there are no accidental slips while driving the machine at any angle or more like whenever you are ‘’toenailing”. Jammed nails will always be there. So, for easy extraction, an open nose design has been included.

An anti-slip ergonomic handle is inserted in this model. Such a handle will make sure you feel comfortable and also gain complete access to the machine. This will enable you to maintain focus while you are at work, and the anti-skid coating will make sure that there is no occurrence of an accidental slip.

For superior control and proper flexibility, you’ll be getting a tool-free depth of the drive adjustment. Hence, you’ll be able to set the depth meter according to your taste and the surface you’ll be working on. Such aspects of a machine will always ensure you with the most accurate results.

This model comes along with a steel magazine which can load over 70 nails. With the Cylinder Valve system, you’ll be able to get increased durability and instant response.

And, to put the cherry on top, there is a selective actuation trigger switch. This allows you to either have contact or sequential nailing. Both modes are used for different purposes which will ensure 100% accuracy.

Check Price on Amazon

  • Recharging and firing section is quite swift due to the Cylinder Valve
  • Easy access between modes
  • Wear-resistant because of the hardened claw tip
  • Depth of drive adjustment is tool-free
  • Rafter hook is also inserted for further convenience
  • The hook is a bit weaker than most

10. Estwing EFR2190 Pneumatic Round Head Framing Nailer

Estwing EFR2190 Pneumatic 21 Degree 3-1/2' Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with...

This is the last product in this list and convincingly a great one. It has a professional-grade magnesium construction, which not only makes the product lightweight but also highly durable.

Hence, the weight enables you to carry it around and not get fatigued, and the skin is durable enough to resist any impact thrown at the tool. There is a selectable fire trigger with this model. This allows you to either choose quick-fire or single-fire. The single-fire lets you make precise placements on any surface you are working on.

On the other hand, the bump-fire mode is made for consistent firing, which is a recommended model for sheathing.

You’ll be able to make proper maneuverability through the usage of the ergonomic handle. Because, when you get to have a good hold over the nailer, accuracy and precision can be achieved with ease. Plus, you’ll also be in your comfort zone while at work.

A no-mar tip is inserted to ensure a smooth finish. However, you’re allowed to remove the no-mar tip to bring exposure to the teeth. This will make things completely lenient whenever you’ll working on surfaces like wood. And, since the fitting is pre-installed, you won’t have to purchase anything extra.

Depth can be easily customized through the usage of simple buttons. This will make sure you always drive a precise flush no matter which surface you have your projects on. But, the best part is, the machine itself warns you whenever you have around five nails left. People often refer it to as a dry-lockout system.

Check Price on Amazon

  • Anti-dust cap enabled for preventing damage in internal parts
  • Anti-dry firing feature to put a stop to the nailer whenever it is running low
  • There is a rafter hook for easy adjustability
  • Magnesium construction
  • Customizable depth meter
  • Not completely wear-resistant

Things to Consider Before You Buy

One of the core fundamentals of purchasing a product is the amount of significance that the product will offer you. If you are a professional woodworker working daily, you can’t compare yourself to a home worker who’s just adding a tool to his collection.

There are tons of considerations involved. Hence, have a look at the most important ones to replenish your mind.

Power Source

There are two types:

Cordless & pneumatic framing nailer

  • Cordless

Powered by a fueling system or battery, cordless nailers are the type of nail guns that are portable. Since there are no wires involved, you’ll easily be able to move around your job site without facing any technical difficulties. However, they do require recharging, which means tons of power consumption is necessary.

  • Pneumatic

Pneumatic nail guns are commonly used with an air compressor. So, there are additional costs involved if you don’t own one. Wiring sort of brings an added stress along the way. But, the good part is that you don’t need to recharge any batteries or replace fuel tanks.


This is a very important factor. It is recommended to pick a nail gun from the weight range of 4.6 lbsto 11 lbs. However, a lot depends on your line of work. If you are a regular worker, it is highly crucial to make sure you get something light to carry it around.

Otherwise, things might get really difficult. However, do make an in-depth analysis of a product before you purchase when it comes to weight. Just because a model is large doesn’t mean it is hefty. A tool’s weight depends a lot on the materials it is made with.


Handling mostly depends on the design. Because there are several features which allow you to achieve maneuverability alongside comfort. A common aspect would be an ergonomic or rubber-coated handle. Hence, with such a feature, you get to have a good hold and also feel cozy while at work.


The capacity of a magazine is something you have to give your utmost priority on. The frequency of your work will solemnly depend upon the number of nails a magazine can hold. If your tool has the capability of holding, let’s say a hundred nails, then you won’t have to reload frequently.

This will save you a ton of time. There are rear-loaded magazines and top-loaded magazines for you to choose from. It is a very common thing to have a nail jammed in your framing nailer.

But, it’ll be a crucial mistake if you choose not to have a product that can make jam clearance easy. There are features such as the anti-dry mechanism which puts a red signal whenever your magazines are about to get empty. Not only does it save time, but you’ll also prevent the surfaces from getting damaged.

Trigger Mechanism

A framing nailer consists of two types of trigger modes: single-fire and bump-fire. Some models include one while others include both. It is always wise to choose products which offer both features. Even though you might have to raise the budget, you will be getting more options.

Bump-fire only requires you to hold the trigger properly while letting the machine do its job on the surface you wish to drive.

It is used especially for fast work. On the other hand, you have to pull the trigger every time you drive a nail while using the single-fire option. This mode lets you attain more control and make great placements.

Depth Control

Different models use different methods when it comes to depth adjustment. Some products have a manual system like the usage of a wrench to change the settings. While there are other tools which use a dial, button, or switch.

Tool-free adjustments are the ones that provide the most convenience. Most consumers take this option because they are very easy to use. However, it is not as accurate as the manual option.

Frequently Asked Questions

Here are the most commonly asked queries about using a framing nailer;

  1. What’s a nail gun used for?

It is used for driving nails into particular surfaces such as wood.

  1. Is nail size important while framing?

It is very crucial. Because nails that are too thin won’t be able to do the job properly and nails which are too long won’t be able to fit in. Hence, it would be best if you chose nails that around 3.5 inches in size.

  1. Can you use a framing nailer for detailed work?

Yes, it can be used on intricate tasks, but it is not recommended because that type of work requires a lot of experience.

  1. Can a non-commercial consumer purchase a framing nailer?

This is one of the most commonly asked questions and of course, they can. You don’t need any special requirements to purchase a branded nail gun.

  1. Will you be able to reduce the noise of a nailer?

There are tools in the market that promises to minimalize the noise. But, unfortunately, you can’t completely remove the noise.

Final Words

When it comes to picking the best framing nailer, the Paslode 905600 tops the list. It may be expensive, but the features the company offers add a ton of value to the product.

There is no wiring involved which will allow you to take it wherever you go. The battery life of the product is exquisite, and then there is a compact design that lets you fit the tool even in the hardest of places. These are just a few attributes of the products, which will surely give you enough reasons to make the final purchase.

As an Amazon Associate I earn from qualifying purchases.

Leave a Comment