How to Use a Palm Nailer?

Nothing compares to pounding nails without hurting your hands at all and with pinpoint positioning too! It is possible when you use a palm nailer instead of a nail gun. Though both of these used an air compressor, a palm nailer can be grasped in one’s palm while a nail gun can’t be grasped in one’s hand.

Not only a palm nailer can be grasped easily, but you can also work with any nail instead of just nail-gun nails. Its size allows you to reach places where a framing nailer or a hammer can’t reach properly. And this nailer provides precision for the solid link holes, whereas a framing nailer fails to provide that type of precision.

Here we are going to explain how to use a palm nailer the right way. Care to discover more about it? Then keep scrolling and learn!


How Does a Palm Nailer Work?

Palm nailers work quite like usual nail guns even though they are very different by looks. A palm nailer works in a finer and quicker way than a nail gun.

This pounds nails evenly with the help of electricity or compressed air, and sometimes you need to exert slight force on it, which is less than what you need to do with hammers or old nail guns.

In other words, a piston-powered by the air pressure pounds the nails. Basically, place a nail precisely where you need it, push the opening on the palm nailer, and compressed air will make the piston pound on the nail. Within a few moments, the nail will have gotten all the way in.


What Is a Palm Nailer Used for?

A palm nailer is used for almost any work that you would do with a regular nail gun. It is small in size, which makes it perfect for working in compact places.

Basically, it is best for any work where there is not much room for a hammer. Palm nailers are also very helpful for joist hangings. But you need to keep in mind that it is not as powerful as a pneumatic nailer. A palm nailer is perfect for any work that requires accurate placing as it has greater precision than a regular nailer.

How to Use a Palm Nailer?

uses of palm nailerOperating a palm nailer can seem daunting at first, but it is the easiest thing to do. Just try using a palm liner like below, and you will be using it as if you were an expert! Here’s what you should do:

Step 1: Read the Manual

It is really important to read the manual before starting as you don’t know about a palm nailer at all. Thus, you should be ready by going through the manual of the palm nailer you have thoroughly.

Step 2: Power up

If you have a palm nailer that runs on battery or which is cordless, then just look for the start button and turn it on. You should not use any old or bad-quality battery.

The cordless version of a palm nailer is already less powerful, so using an old or bad-quality battery will lower the performance even further. On the other hand, you just need to plug the palm nailer to an air compressor if it is a corded one to start working.

Step 3: Right Posture

At first, you should always be comfortable while bending or lying during work, as you sometimes need to exert a slight force for nailing. Secondly, you must sit or stand to keep your face a little away from the palm nailer.

Lastly, you should grasp the nailer firmly in such a way that the palm nailer’s nose always faces out while pounding nails.

Step 4: Proper Grip

You should buy those versions which have hand straps to attain greater results. And you need to make the palm grip comfortable and firm. Believe it or not, this tiny trick of gripping will make the process of nailing with a palm nailer a lot quicker!

Step 5: Nailing Procedure

At first, you should adjust the nose of your palm nailer as per the nails you will be working with if the palm nailer has that property. Secondly, you will have to put the nails into the nailer’s magazine by hand. Thirdly, put the nail’s head over the magnetic tip so that the nail is held firmly.

Finally, place the palm nailer where you want to drive it, press it down, and it should pound into the surface you’re working on.

Step 6: Slight Manual Work

The majority of the time, you will find that the head of the nail remains a bit above the surface. So, you will have to use a hammer to push it inside. But if you want to leave a bit of the nail above the surface for hanging stuff, swiftly pull out before it gets all the way inside.

Safety Measures

You must put on your earplugs as palm nailers are deafening, or else it might harm your ears. And you must wear hand gloves to get a firm grip as palm nailers vibrate or else it might affect the quality of the work.

Moreover, you can also add a compact helmet along with side shields to your safety gear too. Lastly, you should remember to always start with reading the instructions thoroughly that come with your palm nailer and never ignore the safety measures that are mentioned for your version of the palm nailer.

Start Using a Palm Nailer Like an Expert Now!

Now that you know all about the palm nailer, it’s time to buy one. Go and get yourself a palm right now.

But if you still have any queries about palm nailer left unanswered, then feel free to let us know in the comments.

As an Amazon Associate I earn from qualifying purchases.

Leave a Comment