Roofing Nailer vs Siding Nailer – Which One Do You Need?

A nailer is commonly found amongst our household tools. If you are a carpenter or an engineer or a self-dependant person who likes to get their work perfectly done, you’ll need to have a nailer in your toolbox.

Now, our today’s topic is roofing nailer vs siding nailer, where we will compare both these types of nail guns to see which one fits your needs most.

If you are interested to learn about their features and differences, then keep reading. Because, by the end of the article, you’ll know exactly which one is ideal for you.

Roofing Nailers and Its Types

Roofing nail guns are mostly used for re-roofing. While putting on asphalts, insulation board, even solar panel, roofing nailers can be used. They are of three types- spring-loaded, pneumatic, and solenoid. Now each of these is powered in different ways.

  • Spring Loaded: As the name suggests here, to fire out nails out of the chamber, spring is used.
  • Pneumatic: By means of air compressors, these guns are powered. These are the most-handy and recommended among all the options.
  • Solenoid: Electromagnetic polarization powers these nail guns.

 

 Sliding Nailers and Its Types

Siding nail guns are used while working with wood or vinyl structures. These nailers are also of three types. They are-

  • Coil Siding Nailer: The solenoid is its power source that works on the basis of the electromagnetic field. This is better to word on a hard surface.
  • Cordless Siding Nailer: This is battery powered. Therefore, its efficacy is questionable.
  • Pneumatic Siding Nailer: Air compressor is used to power this tool. These are used for heavy-duty work.

 

Roofing Nailer vs. Siding Nailer: What Are the Differences?

There are a lot of people who have a hard time picking between these two. If you are one of them, our comparison guide below will be of help to you. Let’s compare the features of both these nailers.

Nails

Roofing nails are different than siding nails. Their length is determined by the surface thickness. Also, you’ll have to galvanize them to protect them from rusting. In contrast, siding nail guns are mostly ring shank nails, so they last for the siding’s lifetime.

And roofing nails have a broad tip so you can easily pull them out while replacing shingles. They are also 1-3/4-inch in length and are mostly straight. Conversely, the siding nails have a small tip. They are 2-1/2-inch in length.

Siding nail guns have a depth of drive adjustment through which they can exactly measure the length of nail to be used. Roofing nailers lack this feature.

Portability

Roofing nailers are handy if they are pneumatic, but the battery-powered ones are quite heavy, and the person carrying the gun needs to be very careful while replacing the roof.

Though the above point pretty much applies to the siding nailers as well, even with heavy nailers, it is not a very big problem to attach woodworks.

Maintenance and Safety

Roofing nailers usually require high maintenance, unlike siding ones. If you do not oil your machine regularly, they tend to get jammed very quickly.

Also, safety is an issue while using a roofing nail gun, so while working on the roof, ropes should be tied around your body. While using a siding nailer, this is not much needed. 

Measurements

The nails are placed in coils in both the nailers, and they fire 10 at a time when the trigger is pulled. So exact measurements are needed as to where and when the trigger should be pulled.

This also saves a lot of the from refilling nails manually. Simply put the coiled nails in the nail compartment, secure it and start firing the trigger. So, in this department, both the devices are equal.

Grip

The rubber grip makes both the tools easy to hold. However, for me, siding nailers are slightly easier to hold.

Versatility

A roofing nailer can be used for both siding and roofing if needed. And they flush the nails completely into the surface, so it holds the workpieces strongly.

However, due to the lack of depth drive adjustment of roofing nailers, a siding nail gun can be a more handy tool.

Conclusion

Now, we are at the end of our article. I hope our roofing nailer vs siding nailer comparison guide has managed to vanish any confusion you had regarding these two nailers.

Here, we pitted them against each other so that the differences become clear to you. Let us know in the comments section if we were successful in that regard.

Leave a Comment

shares